|
|
|
|
|
|
|
|
"
Tips & Tricks For Mobile Phones " |
|
|
Nokia Secret
Codes
* please use the codes at your own risk.
* Off your phone and now keep fingers on three key's (green)
calling key and other finger on (*), and and one at (3),
while keeping fingers on these three key switch on your
phone keep those fingers on the till formatting appears on
your phone. Its a factory reset, it has nothing to do with
your card memory it formats your phone memory only and it
only works on nokia 6600.
* For other nokia symbian phones *#7780# or *#7370# works as
factory reset any one of these two codes will work for you.
(Speed up your nokia symbian a bit) here what you got to do.
First go to your To-do List
- Make a note and input as follows
Subject: Speed
Due Date: 04-08-2005(mm-dd-yy)
Priority: set to High
then press Done
- Make a second Note and input as follows
Subject: Qoukie
Due Date: 04-08-2005(mm-dd-yy)
Priority: set to Low
then press Done
- Do not exit yet, Press the Option of your Subject note w/c
is Speed and Mark as done
- then Press the Option of your Subject note w/c is Qoukie
and Mark as done
- Now, reboot your mobile.
It apparently works well when running apps
it speeds up realone player , removes lags in smart movie
it speeds up your phone
this works in nokia 6600, 7610, 6630, 6670 it makes a bit
faster
CODE FUNCTION PERFORMED
* 3370# This Nokia code activates Enhanced Full Rate Codec (EFR)
- Your Nokia cell phone uses the best sound quality but talk
time is reduced my approx. 5%
#3370# Deactivate Enhanced Full Rate Codec (EFR)
* #4720# Activate Half Rate Codec - Your phone uses a lower
quality sound but you should gain approx 30% more Talk Time
*#4720# With this Nokia code you can deactivate the Half
Rate Codec
*#0000# Displays your phones software version, 1st Line :
Software Version, 2nd Line : Software Release Date, 3rd Line
: Compression Type
*#9999# Phones software version if *#0000# does not work
*#06# For checking the International Mobile Equipment
Identity (IMEI Number)
#pw+1234567890+1# Provider Lock Status. (use the "*" button
to obtain the "p,w" and "+" symbols)
#pw+1234567890+2# Network Lock Status. (use the "*" button
to obtain the "p,w" and "+" symbols)
#pw+1234567890+3# Country Lock Status. (use the "*" button
to obtain the "p,w" and "+" symbols)
#pw+1234567890+4# SIM Card Lock Status. (use the "*" button
to obtain the "p,w" and "+" symbols)
*#147# This lets you know who called you last (Only vodofone)
*#1471# Last call (Only vodofone)
*#21# This phone code allows you to check the number that
"All Calls" are diverted to
*#2640# Displays phone security code in use
*#30# Lets you see the private number
*#43# Allows you to check the "Call Waiting" status of your
cell phone.
*#61# Allows you to check the number that "On No Reply"
calls are diverted to
*#62# Allows you to check the number that "Divert If
Unreachable (no service)" calls are diverted to
*#67# Allows you to check the number that "On Busy Calls"
are diverted to
*#67705646# Phone code that removes operator logo on 3310 &
3330
*#73# Reset phone timers and game scores
*#746025625# Displays the SIM Clock status, if your phone
supports this power saving feature "SIM Clock Stop Allowed",
it means you will get the best standby time possible
*#7760# Manufactures code
*#7780# Restore factory settings
*#8110# Software version for the nokia 8110
*#92702689# Displays - 1.Serial Number, 2.Date Made,
3.Purchase Date, 4.Date of last repair (0000 for no
repairs), 5.Transfer User Data. To exit this mode you need
to switch your phone off then on again
*#94870345123456789# Deactivate the PWM-Mem
**21*number# Turn on "All Calls" diverting to the phone
number entered
**61*number# Turn on "No Reply" diverting to the phone
number entered
**67*number# Turn on "On Busy" diverting to the phone number
entered
12345 This is the default security code
press and hold # Lets you switch between lines
[Secret Codes for 3330] Imei Information :-
To view the imei number on this model simply type *#06#
Software version type *#0000#
*#170602112302# shows the SW version.
ISDN Number :-
ISDN number For checking ISDN number enter *#92772689#
Warranty Menu To view the warranty menu enter *#92702689#
[*#war0anty#]
1) shows the serial nr.
2) shows when the cel phone was made mmyy
3) shows when the cel. phone was purchased mmyy
4) shows how many times the cel. phone has been repaired.
5) makes you capebel of transferring user data if you have
the gear for it
6) shows how many houres the phone has been on Warranty
Menu To view Warranty menu enter *#92702689# [*#war0anty#]
Phone asks 'warranty code:' Press the following warranty
code: 6232 (OK) : Displays the Month and Year of Manufacture
(MMYY)
7332 (OK) : Displays the date of the last repairment - if
found ('DATE NOT SAVED'...) 7832 (OK) : Displays (if found)
the date where the phone was purchased ('DATE NOT SAVED'...)
9268 (OK) : Displays Serial Number
37832 (OK) : Set the Purchasing Date MMYY (Warning: You can
only do this once - So be careful ...)
87267 (OK) : Transfers ALL phone numbers, pictures, sounds
from one phone to another eg. if broken (via IRport.)
Sim Clock Stop :-
To view if sim clock can be stoped enter *#746025625#
[*#sim0clock#] (Sim-clock-stop is a kind of standby mode
which will save battery time) May not work with all firmware
versions.
Enhanced Full Rate/Half Rate Enhanced Full Rate Codec :-
(EFR) For activation enter *#3370#
For deactivation enter *#3370*
Enhanced Full Rate Will give you much better sound quality
when you enable it. The new Enhanced Full Rate CODEC adopted
by GSM uses the ASELP (AlgebraicCode Excitation Linear
Prediction) compression technology. This technology allows
for much great voice quality in the same number of bits as
the older Full Rate CODEC. The older technology was called
LPC-RPE (Linear Prediction Coding with Regular Pulse
Excitation). Both operate at 13 kilobits.(but you take up
more space on the network, so they can charge you more) -
Talk-time is reduced with about 5%
Half Rate Codec
For activation enter *#4720#
For deactivation enter *#4720* In all cases the phone will
automatically restart.
Half Rate will give you bad soundquality, which gives the
serviceprovider the opportunity to have more calls on the
network, and you might get a lower charge from them. - Will
give you 30% longer talk-time.
Imei Code :-
To View IMEI (International Mobile Equipment Identity) enter
*#06# Firmware Versions
Check To view the Firmware version enter *#170602112302#
Restore Factory Settings :-
To restore factory settings (Memory, language, counters not
included) enter *#7780#
Manufacturer Information To view Week and Year of
manufactureenter *#3283# [*# D A T E #] The last two digits
are the year. If the year is 95, the first two digits are
the month. For 96 the first two digits are the week of the
year.
Firmware Version :-
To view the firmware version enter *#170602112302# or
*#9999# On newer phones, the code has been changed to
*#682371158412125#
SAMSUNG
Samsung Reset Codes
You can try these in case you downloaded corrupted or
incompatible Java midlets or other media, which are causing
problems with the phone.
*2767*JAVA# Java Reset and (Deletes all Java Midlets)
*2767*MEDIA# Reset Media (Deletes All Sounds and Pics)
*2767*WAP# Wap Reset
*2767*CUST# Reset Custom EEPR0M
*2767*FULL# Reset Full EEPR0M (Caution)
For example : *2767*JAVA# would be keyed in as *2767*5282#
Note : Not all codes will work with SGH-C100.
Other Samsung Codes
*#06# IMEI code
*#9998*4357# Help Menu
*#9998*5282# Java menu (GRPS/CSD settings for JAVA server)
*#9999#0# Monitor Mode
*#9999# or *#9998*9999# Software Version
*#8888# or *#9998*8888# Hardware Version
*#9998*746# or *#9998*0746# or *#0746# Sim Infos
*#9998*523# or *#9998*0523# or *#0523# Display Contrast
*#9998*842# or *#9998*0842# or *#0842# Vibration On (until
you push OK)
*#9998*289# or *#9998*0289# or *#0289# Buzzer On (until you
push OK)
*#9998*288# or *#9998*0288# or *#0288# Battery & Field Infos
*#9998*377# or *#9998*0377# Error log
*#9998*778# or *#9998*0778# or *#0778# Sim Service table
*#9998*782# show date and alarm clock
*#8999*638# show network information
*#9998*5646# change operator logo at startup
*#9998*76# production number
*#9998*968# view melody for alarm
*#9998*585# Non-Volatile Memory (NVM)
*#3243948# Digital Audio Interference Off
*#32436837# Digital Audio Interference On
SAMSUNG T100 SECRET CODES
*#06# -> Show IMEI
*#9999# -> Show Software Version
*#0001# -> Show Serial Parameters
*2767*3855# -> Full EEPROM Reset ( THIS CODE REMOVES
SP-LOCK!!!! but
also
change IMEI to 447967-89-400044-0, you must use CHGIMEI to
restore it)
*2767*2878# -> Custom EEEPROM Reset
*#8999*228# -> Battery status (capacity, voltage,
temperature)
*#8999*246# -> Program status
*#8999*289# -> Change Alarm Buzzer Frequency
*#8999*324# -> Debug screens
*#8999*364# -> Watchdog
*#8999*377# -> EEPROM Error Stack
*#8999*427# -> Trace Watchdog
*#8999*523# -> Change LCD contrast
*#8999*544# -> Jig detect
*#8999*636# -> Memory status
*#8999*746# -> SIM File Size
*#8999*778# -> SIM Service Table
*#8999*785# -> RTK (Run Time Kernel) errors
*#8999*786# -> Run, Last UP, Last DOWN
*#8999*837# -> Software Version
*#8999*842# -> Test Vibrator
*#8999*862# -> Vocoder Reg
*#8999*872# -> Diag
*#8999*947# -> Reset On Fatal Error
*#8999*999# -> Last/Chk
*#8999*9266# -> Yann debug screen (=Debug Screens?)
*#8999*9999# -> Software version
*0001*s*f*t# -> Changes serial parameters (s=?, f=0,1,
t=0,1)
(incomplete)
*0002*?# -> unknown
*0003*?# -> unknown
SAMSUNG V200 SECRET CODES
v200 Unlock Code-> *2767*7822573738#
*#9324# Netmon (press the hangup key to exit)
*#9998*JAVA# Edit GPRS/ CSD settings (S100 Only)
*#9998*Help# Help screen/ List of codes
*#9998*LOGO# Change operator Logo
*#9998*RTC# RTC Display
*#9998*Bat# Battery Status
*#9998*Buz# Turns Buzzer ON
*#9998*Vib# Turns Vibrator ON
*#9998*LCD# LCD Contrast
*#9998*9999# Softwre Version
*#9998*8888# Hardware Version
*#9998*377# NVM Error Log (?????)
*#9998*NET# SIM Network ID
*#9998*778# SIM Serv. Table
*#9998*SIM# SIM Info
*#9998*PN# Production No.
*#9998*968# Reminder Tune
*#9998*NVM# Displays Non-Volitile Memory Status
*#9999*C# ???????????????????
*#06# Displays phones I**I No.
*#9998*2576# Forces SIM Error
*#9998*DEAD# Forces Phone Crash
*2767*MEDIA# Resets the medis on the phone (deletes all
downloaded
pics/tones)
*2767*FULL# Resets the EEPRON *DANGEROUS*
*2767*CUST# Resets the Custom EEPRON
*2767*JAVA# Resets JAV downloads (deletes all downloaded
midlits)
*2767*STACKRESET# Resets Stack
*2767*225RESET# ????????????????? * Dangerous *
*2767*WAP# Resets WAP Setting & Deletes Favorites
SAMSUNG A800 SECRET CODES
The universal unlock code is *2767*637# do this with out
your sim in. |
 |
|
|
|
|
|
|
